[Text|High-tech LED reporter Xu Chaopeng] High-profile LED industry event--2014 Gaogong LED Lighting Exhibition will be held in Guangzhou Pazhou Canton Fair Complex on September 26-28, Shenzhen Ruwei Electronics Co., Ltd. (hereinafter referred to as "Ru-Electronics") will present a new type of separate thermoelectric separation circuit board of the type DTS-1 at the exhibition. It is reported that this type of circuit board can solve the heat dissipation problem of the current LED light source and reduce the phenomenon of light decay caused by the light source.
In the current LED industry, heat dissipation has always restricted the innovation and development of the industry's overall technology. Therefore, solving the LED fever problem existing in the current enterprise production has always been an important direction for discussion and research in the industry.
"In this, the selection of thermal conductive materials is a key factor. As far as I know, the thermal conductivity of the best thermal conductive materials on the market is also within 2.5W/MK." Confucius Electronics' general manager Jian Yucang told reporters The thermal conductivity in this case is tens or even hundreds of times different from the heat dissipation requirement of the LED itself.
Since last year, Confucian Electronics has begun to develop such a separate thermoelectric separation circuit board to solve the current heat dissipation problem in the LED industry. It is reported that this product has obtained relevant patents (Patent No. 8.) and the thermal conductivity is as high as 200W/mk.
“We have introduced this separate thermoelectric separation board to realize the requirement that the metal heat sink substrate and the conductor are on the same plane.†Jian Yucang told reporters that when using this kind of circuit board, the lamp beads and other components are used in SMT processing. The electrical leads are soldered directly to the PAD of the conductor, while the heat sink is soldered directly to the metal heat sink, so the heat generated can be quickly conducted out at any time.
“At the same time, due to the realization of the thermoelectric separation structure, the LED luminaires of our products can be made thick enough, so the finished light source designers no longer have to worry about the contradiction between electricity and heat.†To.
According to the reporter, since the launch of this new product of Confucianism Electronics, it has aroused widespread concern in the industry. This time, Confucian Electronics brought this innovative product to the high-tech LED lighting exhibition, which is bound to attract more people's attention.
In the current LED industry, heat dissipation has always restricted the innovation and development of the industry's overall technology. Therefore, solving the LED fever problem existing in the current enterprise production has always been an important direction for discussion and research in the industry.
"In this, the selection of thermal conductive materials is a key factor. As far as I know, the thermal conductivity of the best thermal conductive materials on the market is also within 2.5W/MK." Confucius Electronics' general manager Jian Yucang told reporters The thermal conductivity in this case is tens or even hundreds of times different from the heat dissipation requirement of the LED itself.
Since last year, Confucian Electronics has begun to develop such a separate thermoelectric separation circuit board to solve the current heat dissipation problem in the LED industry. It is reported that this product has obtained relevant patents (Patent No. 8.) and the thermal conductivity is as high as 200W/mk.
“We have introduced this separate thermoelectric separation board to realize the requirement that the metal heat sink substrate and the conductor are on the same plane.†Jian Yucang told reporters that when using this kind of circuit board, the lamp beads and other components are used in SMT processing. The electrical leads are soldered directly to the PAD of the conductor, while the heat sink is soldered directly to the metal heat sink, so the heat generated can be quickly conducted out at any time.
“At the same time, due to the realization of the thermoelectric separation structure, the LED luminaires of our products can be made thick enough, so the finished light source designers no longer have to worry about the contradiction between electricity and heat.†To.
According to the reporter, since the launch of this new product of Confucianism Electronics, it has aroused widespread concern in the industry. This time, Confucian Electronics brought this innovative product to the high-tech LED lighting exhibition, which is bound to attract more people's attention.
Zhejiang Casnovo Materials Co., Ltd. , https://www.casnovonewenergy.com