- Model NO.: FV30B+C/4-*** S
- Structure: Pluggable
- Application: Substation
- Certification: ROHS, ISO9001, CE, TUV
- Color: Orange Module + Grey Base
- Function: Surge Protection for Power Line
- Origin: China
- Type: Power Source Arrester
- Installation: DIN Rail
- Operation Voltage: Low Voltage
- Protection Mode: L1-PE, L2-PE, L3-PE, N-PE
- Speed: <25ns
- Trademark: FATECH, OEM is welcome
- HS Code: 85363000
Three phase 4 poles Class B+C/I+II, type 1+2 surge surge protection device, DIN rail mount replaceable surge modules Imax 60kA, Iimp 7kA.
FV30B+C/4 surge protection device are suitable for lightning and surge protection in AC 50/60Hz, 220/380V.
Features of the surge protection device:
There is a thermal cutoff member inside the ge protective device, when the device is over-current or over-voltage and the puncture is nonseviceable, the thermal cutoff member will automatically separate from the surgege protective device from the electrical network, and the indication window will turn red from green.
APPLICATION of surge protection device FV30B+C/4-***(S):
AC power line of house, bank, telecom tower and so on.
Electrical parameters of the surge protection device:
Â
| Model No.: | Â | Â | Â | FV30B+C/4-150S | FV30B+C/4-275S | FV30B+C/4-385S | ||
| Max. continuous operating voltage | U c | V | 150 | 275 | 385 | |||
| Requirement class to DIN EN 61643-1:2005 | Â | Â | Class B+C | Class B+C | Class B+C | |||
| Rated Voltage | U n | V | 220/380 | 220/380 | 220/380 | |||
| Maximum lightning impulse current (10/350μs) | I imp | kA | 7 | 7 | 7 | |||
| Max. discharge current (8/20μs) | I max | kA | 60 | 60 | 60 | |||
| Voltage protection level (at 20kA) L-N | U p | kV | ≤0.9 | ≤1.5 | ≤1.8 | |||
| Response time | U p | kV Â | < 100 Â | < 100 Â | < 100 Â | |||
| Recommended back-up fuse | tA | ns | 160 | 160 | 160 | |||
| Operation temperature range | Â | A | -40 ~+85 | -40 ~+85 | -40 ~+85 | |||
| Degree of protection | Â | Â | IP20 | IP20 | IP20 | |||
Â
AC110V LED Tape Light high Voltage led strip(AC110v led strip), the composition of the material: type 3528, 5050 LED lamp beads, FPC flexible circuit boards, resistors, solder paste, silicone plugs, plastic casing, wires and so on. High-pressure light bar length: up to 100 meters, the unit can be cut every meter.
Easy to install.
5050 Ac110V Led Tape Light high-voltage lights
5050 AC110V LED Tape Light high-voltage lights
Alternatively neon tubes.
Features:
1. Adopt very soft PCB board as a substrate, can be bent and fixed to the convex surface;2. Products suitable for installation in narrow space inside;
3. AC110V LED Tape Light is for Each one meter a unit can arbitrarily cut off along the tangent above, without damaging other parts of the existing products of 50 meters per roll, you need any length can be customized.
4. With low power consumption, generate less heat, no glare, impact resistance and other characteristics. 110-volt power supply.
AC110V LED Tape Light Use: bars, hotels, hostels, decorative lighting, background lighting.
Installation ways:
â‘ AC110V LED Tape Light of Bandwidth four-wire light about 22mm, a thickness of about 8mm, weight about 0.25kg / m (4 meter by Kg)
â‘¡ AC110V LED Tape Light four-wire lights with a total of four wire, three rows of lights (note instead of four rows of lights Oh ~ ~), each row of one meter 24 lights, 24 * 3 = 72. Because each lamp beads power is 0.05W, the power lights with 72 bead is: 72 * 0.05 = 3.6W.
Mingxue Optoelectronics Co.,Ltd. has apply the I S O 9 0 0 1: 2 0 0 8 international quality management system certificate, For AC110V LED Tape Light, we apply the CE, RoHS and SAA certificate for our led lighting product.
AC110V LED Tape Light
Ac110V Led Tape Light,Energy Saving Led Tape Light,Led Tape Light For Kitchen,Small Led Tape Light
Shenzhen Mingxue Optoelectronics CO.,Ltd , http://www.mingxueled.com