Hongli Optoelectronics pushes high-power COB light source LT products customers have been imported

Hongli Optoelectronics independently researched and developed, combined with the market's general products and the substitutability of assembly, broke through the bottleneck of COB packaging design in the past, and launched a new high-power COB light source LT product series designed by the new concept.

Hongli Optoelectronics' new COB LT series, power coverage of 10W-100W, high light output, low thermal resistance package design (100W thermal resistance as low as 0.4 or less); for lighting applications, replacing traditional injection molding integrated modules, perfect improvement of traditional injection molding The integrated package is resistant to temperature cycling NG defects; the new package design of the COB series is based on saving raw material use cost, and comes with a special buckle kit, which is extremely cost-effective and provides customers with high-efficiency and low-cost COB lamp application solutions. Program.

COB LT series is very suitable for high-power wide-area lighting fixtures such as floodlights, tunnel lights, mining lamps, etc. It is recommended LT005, color temperature 6000K, power is 53.4W/74.7W/106.8W, and luminous flux corresponds to 5000 lm /7000lm /10000 lm. In addition, Hongli Optoelectronics COB has achieved full automation, avoiding the semi-manual operation of traditional integrated light sources.

Hongli Optoelectronics has a number of packaged products to take the lead through the third-party IES LM-80 6000 hours test, COB series also have products under test. In addition to providing customers with third-party reliability testing reports, Hongli Optoelectronics has an industry-standard LM-80 laboratory that can provide high-value LM-80 test reports for the company's new products in time to further enhance the product. Comprehensive performance of light efficiency, reliability and stability.

The advantages of a new generation of products compared to traditional products:

(This article is contributed by Hongli Optoelectronics)

N-NET Repeaters (single-/multi-mode converters) are applied in 100Mbps fast Ethernet /1000Mbps Gigabit Ethernet Network which is wired with both single mode fibers and multi-mode fibers. It can not only fulfill the conversion of single mode and multi-mode at 1310nm wavelength, but also that of 850nm/1310nm and 1550nm wavelengths, which functions as a relay and then makes multi-mode fibers transmit farther. It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.

Repeater

Signal Booster Repeater,Wireless Repeater,Dual Band Signal Repeater,Mobile Repeater,3R Repeater, 10G 3R Converter Repeater

Shenzhen N-net High-Tech Co.,Ltd , http://www.nnetswitch.com