Shandong Heze Quality Inspection Institute has developed LED street lamp product standards

Recently, the Energy Conservation Testing Center of the Quality Inspection Center of Heze City, Shandong Province has requested the local enterprises to actively help enterprises to improve the standard system. By collecting technical data, improving design plans, production process equipment and improving quality testing methods, a new type of high-efficiency LED energy saving has been developed. The street lamp enterprise product standard fills the gap in the local standard of an energy-saving product in the city.

LED is a high-efficiency light-emitting diode. Due to its high energy efficiency, LED devices are used more and more widely. LED devices can be used to manufacture street lamps, garden lights, landscape lights, advertising displays, etc. Product standard for street lamps. The technicians of the Heze City Energy Conservation Monitoring Center worked hard to collect a large amount of technical data, to take the fine extraction, to eliminate the false truth, combined with high-precision testing instruments, and based on the experimental data, finally developed a more perfect LED street lamp enterprise product standard, which solved the long-term trouble. The problems of enterprises have been welcomed by enterprises.

4.2mm Wire To Board Connectors

4.2mm Wire To Board Connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.

4.2 mm pitch connectors wire to board connectors

Fully isolated terminals, positive locking housings, low-engagement forces and polarized housings, also offers blind mating, TPA and higher current options. Pitch 4.20mm

4.2 mm pitch connectors wire to board connectors Including:
male housing
Male housing of connector, UL94V-0 and UL94V-2, hanging and panel mount, single row and dual row, 2 to 24 circuits.

Female housing
Female housing of connector, with locking latch in order to avoid loosing, and with polarity in order to avoid dis-mating. One row and dual rows, from 2 circuits to 24 circuits.

Terminal
The conductor of connector, brass or phosphor bronze, tin plated over nickel, selective gold plated as customer's requirement.

Header
Header, right angle and vertical , with peg and without peg, DIP soldering, single row and dual row, 2 to 24 circuits.

4.2 mm connectors wire to board connectors General Specification:
Current rating: 6A AC, DC.(AWG#18)
Voltage Rating: 600V AC,DC
Withstanding Voltage: 1500V AC/minute.
Insulation resistance: 1000MΩ min
Contact resistance: Initial Value/ 10mΩ max
Temperature rise: -40'C ~ 105'C.

Circuit Board Connectors,4.2Mm Wire To Board Connectors,4.2Mm Pcb Wire To Board Connector,4.2Mm Pin Wire To Board Connector,.165" Wire To Board Connectors,4.2mm Power Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com