"This program is sponsored by the China Single Dog Protection Association."
"No abuse, no harm! 55555~"
ForewordMy main machine for the country's Moto X+1 (XT1085) 32G with ebony back cover, purchased in July 2015 in Jingdong, replacing the bright screen for 3 hours, border cracking, camera shake screen, put the mosquito sound and power IC Faulty Nexus5.
When using Nexus5, I use the Unicom card, and the package and traffic prices are more affordable. After some special reasons (in fact, China Unicom's 10 yuan 1.5G flow packet can not be purchased, of course, there are a lot of harassing phone), anger and switch to telecommunication cards, all of a sudden a lot of telephone charges spending (I am a heavy mobile phone There are no Wifis in the area where Internet users are active and often active. After paying a 200+ flow fee for a certain month, I painedly concluded that I had unsubscribed all traffic packets from the telecommunications card and bought a 4G flow card from China Unicom. The traffic card is enough for Tmall's Liaoning Unicom flagship store (I am Shenyang, Liaoning Province, and I live in Shenyang). The card purchase fee is 70 yuan, the card contains 90 credits, and 30 yuan per month includes 7G local traffic, and the card charges are over. After the reservation package can continue to pay for use. Due to the different policies of operators around the country, the packages are also different and there is no link to the traffic card. Everyone can find the traffic card in Tmall or business office app.
After the traffic card arrives, I need an internet terminal. Huawei once considered Huawei's 4G routers (mobile Mifi) and purple rice 4G mobile power supplies. However, considering the convenience of portability and the utilization of equipment, it is more practical to purchase a hotspot backup machine because the traffic card will not be used once it has appeared. Or is it inserted in the new main mobile phone, idle mobile utilization is much higher than 4G routers.
Therefore, the spare machine's purchase standard came out - standby time should not be too short, support Unicom 4G, using the native system optimal, of course, but also cheaper prices. For the above reasons, I purchased a Moto E2 Unicom 4G single card version at a certain treasure, the model is XT1524, here's a link to Meyer:
Mobile phone hardware configuration: Qualcomm Xiaolong 410 SoC, 8G ROM, 1G RAM, 4.5-inch 540X960 resolution TFT display, front 30W + rear 500W pixel camera, 2390mAh battery, no flash, no electronic compass and gyroscope, support Moto's initiative Display and shake to turn on the camera function.
(Note: The following photos are all shot with Moto X+1. Please forgive me if you are using slag slag equipment. Don't like to spray it.)
Because it is not the original packaging, it is not on the open box map.
1 mobile phone appearance
From the front and back, the phone adopts the standard moto design language, namely the curved back cover with a fitting hand and the Napoleon hat with a top frame. The handset has a metal trim. The handset of the phone also serves as an external speaker. .
Plastic frame, the right side is the power button and volume button, but different from the Moto X +1 metal material, the volume button of the Moto E2 is plastic, but still retains the power button's frosted texture, easy to blind operation and volume keys Resolution; no buttons are set on the left side; the bottom is a Micro USB (Type-B) interface, and on. . . The groove, here to sell a child, the next part to say.
2 boot card
Looking around the phone, I did not see the card slot, and the back cover could not be opened. What ghost? The original Moto E2 was inserted into the card by opening the border. Of course, the official out of a variety of colors of the border, if you are "color control", then you can match different colors of the border to make the phone unique.
The left side is a SIM card slot and a TF card slot. The card slot is double-layered, indicating that the phone has a dual card version, but this is a single card version and one card slot is blocked. On the right is the volume and power buttons. There is also a white object that looks like it can be picked up.
It was originally the "nameplate" of a mobile phone. If it was a domestic version of a mobile phone, the above would have to say "xxx TD-LTE Digital Mobile Phone".
PS: Because I need to introduce the appearance of the mobile phone, I put the steps of inserting the card in front of the boot. However, under the actual situation, the Moto phone and the Nexus phone of the native system all need to be booted first, and then the setup wizard completes the insertion of the card into the desktop. , because if you insert the card first, you will forcibly connect to the Google server, and the card activation will not enter the system unless you are in the global "Science Internet" network environment.
2. System Experience
Moto E2 uses the Moto pure native system. The preset version of the mobile phone is 5.0.2. So the solution is to solve the BL lock, brush the 5.1 version of the bottom package, and then the system is rooted and streamlined, and according to their own habits, Install the xposed framework + gravity toolbox to adjust the system UI (the desktop is the Launcher3 that I extracted from the AOSP Brush Pack).
Native Android's fluency is doubtless, even on this very low-profile machine. However, if the App is installed too much, it will inevitably affect the performance. This phone supports FM function, but you need to insert headphones or speakers to use. In addition, it also supports a simplified version of Moto gesture operation and active display, but does not support Moto voice.
Here's a bit of a tantrum. In the "Settings" - "About Mobile Phones," the model number column, in the Chinese language system, "Moto G LTE" is displayed, and in other languages, "Moto E" is correctly displayed. LTE, it is reported that the problems brought by the error of the official system's Hanization, although harmless, but it is really forced to die obsessive-compulsive disorder.
3. Take pictures and life
For photographing, the 30W pre-+500W rear-mounted camera should not be expected to produce any good photos. Basically, it is in a state of “what is better than nothingâ€.
In terms of endurance, I am going to go out at 10:00 a.m. of electricity at 10:00 a.m. and Unicom's 4G hotspots, and a mobile phone is connected. By 9:00 PM, there is 25% electricity left.
Write lastI have used mobile phones using native Android systems since college in 12 years. From Galaxy Nexus, Nexus5, Moto X+1 to now XE dual owners, it can be said that "tossing" has accompanied me through these years of life. However, with the increasingly serious awakening mechanism of domestic software "tumor" and the popularization of functions such as mobile payment, the ease of use of native Android is greatly reduced. It is very likely that my next mobile phone will be replaced by Samsung, Huawei and the like. However, I still retain a native Android phone as a backup machine.
Btw, as of press time, my Moto X+1 appeared inexplicable handset failure. I had to buy the corresponding accessories and repair it myself. During the repair process, I will still write an original one.
the above.