A few days ago, Xiaomi released the millet router 3, priced at 149 yuan, will start on April 6 rice flour festival. Millet router 3 uses a minimalist and ultra-thin design, the front is only designed with a logo and an indicator light, while the back of the fuselage is designed to lay four antennas can be laid flat, white main colors make the router more versatile. More importantly, Xiaomi's router 3 is equipped with four external omni-directional multi-element vibrator high-gain antennas, supports 802.1 lac wireless protocol, and provides Gigabit Wi-Fi. The network performance is excellent. Next, let's look at the picture first!
Appearance, millet router 3 overall design is more fresh and simple, the front of the machine design has a LOGO, the front of the fuselage for the red, blue and yellow heat dissipation LED indicator. The design of the fuselage is also very thin, with a thickness of only 23.5 mm, a length and width of only 195 x 131 mm, and an antenna erected with 177.3 mm. The overall appearance is very small.
The design of the thin airframe and antenna also affected the number of interfaces to some extent. The interface is mainly a 100M WAN port, two 100M LAN ports, and a USB 2.0 port. The daily application is slightly inconvenient. The bottom of the fuselage cooling hole design is very hard, there are a total of 411 cooling holes, the rear end has 3 cooling openings, forming a natural air duct, cooling effect is very good.
Although the interface is small, Millet Router 3 has been upgraded in configuration. Millet Router 3 internal MediaTek MT7620A processor, MIPS24KEc architecture core, frequency 580MHz, with 128MB DDR2 memory, 128MB SLC high-speed flash memory. The upgraded Flash configuration allows the router to run more steadily, effectively reducing the number of router restarts, and supporting more Internet-connected devices in parallel.
In terms of network, according to official reports, Xiaomi's router 3 uses four external omni-directional multi-element high-gain antennas. Two of them support 2.4GHz and the maximum gain is 5dBi. The other two support 5GHz and the maximum gain is 6dBi. It claims to support up to 126 devices. equipment. The wireless specifications support dual-band dual-band 802.11ac and 2x2 dual-receiving. The maximum speeds in the 2.4 and 5GHz frequency bands are 300Mbps and 867Mbps respectively, but beamforming is not supported. At the same time, millet router 3 also provides three kinds of acceleration methods: broadband speed, web page acceleration and download acceleration, users can get a better online experience as needed.
In terms of application, through exclusive app of Millet Router 3, rich audio and video content download and fun function plug-ins can be obtained. Through an external mobile storage device, Xiaomi's router 3 can be transformed into a very cost-effective audio and video center. The high-definition video content can be downloaded and viewed through TV, box, mobile phone, and pad.
Millet Router 3's exclusive App Toolbox provides a variety of smart plug-ins, allowing users to manage their routers at any time from home. At the same time, Xiaomi Router 3 is also the control center of the smart home, which is deeply adapted to the intelligent hardware of the Xiaomi Ecological Chain and manages everything at home.
On the network side, the four external antennas of the Xiaomi Router 3 are omni-directional multi-element high-gain antennas. Two of them support 2.4 GHz, and the maximum gain is 5 dBi. The other two support 5 GHz and the maximum gain is 6 dBi. Because of this, Xiaomi's router 3 supports 2x2 dual-receiving and dual-receiving on the basis of dual-band 802.11ac support. The maximum speeds of the 2.4 and 5GHz frequency bands are 300Mbps and 867Mbps, respectively.
In terms of operating systems, Xiaomi Router 3 is based on OpenWRT deeply customized MiWiFi, which provides root privileges, native toolchains, and SDKs. It supports Thunder, Sogou, and other plug-ins. It supports security, anti-hacking, anti-hacking, anti-hijacking, anti-virus, and anti-fraud/anti-security. Leaked/anti-malware website.
The design of the thin airframe and antenna also affected the number of interfaces to some extent. The interface is mainly a 100M WAN port, two 100M LAN ports, and a USB 2.0 port. The daily application is slightly inconvenient. The bottom of the fuselage cooling hole design is very hard, there are a total of 411 cooling holes, the rear end has 3 cooling openings, forming a natural air duct, cooling effect is very good.
ZHENGZHOU KAIXUE COLD CHAIN CO., LTD. , https://www.supersnowfreezer.com