With the universal meter's resistance file, measure the normally closed contact and the moving point resistance, the resistance value should be 0; and the resistance value of the normally open contact and the moving point is infinite. This can distinguish the normally closed contact, which is the normally open contact.
2, measuring coil resistance
The universal table R×10Ω can be used to measure the resistance of the relay coil to determine whether there is an open circuit in the coil.
3, measuring the pull-in voltage and pull-in current
To find adjustable power supply and current meter, input a set of voltage to the relay, and in the power supply circuit in series to monitor the current meter. Slowly increase the voltage of the power supply. When you hear the sound of the relay, record the pull-in voltage and the pull-in current. For accuracy, try several times and average.
4, measure the release voltage and release current
The connection test is also performed as described above. When the relay is pulled in and then the supply voltage is gradually reduced, when the relay is heard to release the sound again, the voltage and current at this time are noted, and it may be tried several times to obtain the average release. Voltage and release current. Under normal circumstances, the release voltage of the relay is about 10~50% of the pull-in voltage. If the release voltage is too small (less than 1/10 of the pull-in voltage), it cannot be used normally, which will threaten the stability of the circuit. The work is not reliable.
All-in one Automatic Guling Technology, complete IP 68 waterproof.can be used under water , 3 years warranty.High light transmittance >97.7%, -20 to 80c working environment.Low-pressure molding, low-temperature solidfication for a better LED protection.Great Weather and UV resistance, anti-yellowing in 5 years.High-flexibility, anti-shock in different installation scenarios.Use the high quality smd leds,such as 2835,3014,5050,all leds are epistar chips inside,reliable package. Each led can be made into different colors,including the range of 2700K to 6000K,and also can do single color,such as red,green,blue,amber,purple etc.Many application place need the color changed,we can make dual color strips ,RGB strips as well.All-in-one led strips can be used indoor or outdoor application place,especially outdoor use because of his IP rating is 68.As everyone knows,we can't put the products underwater except they reaches IP68.All the products have passed CE,ROHS,FCC certification,they can be selled all over the world.
All-In-One Led Strip Light,Smd2835 Led Strip Light,Smd3014 Led Strip Light,Smd5050 Led Strip Light
Guangdong Kamtat Lighting Technology Joint Stock Co., Ltd. , http://www.ip68ledstrip.com